Zanussi ZVC66030XA Hobs Not Working

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi ZVC66030XA Hobs Not Working

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 5, 2017 at 3:59 pm #90276
    jontymox
    Participant

    Happy New Year everyone,

    Visited the above cooker this morning, as it was tripping out.

    Eventually traced to a terminal block screw lodged between the fan oven motor windings and panel!

    However, upon re-assembling have found that none of the ceramic hobs are working.

    Had very little time to determine why, although happy with related wiring and connections.

    The back panel remained off whilst testing, and I wonder if I have disturbed a microswitch/cut-out, as I did raise the hob to inspect prior to finding the offending screw.

    Regards,

    jonty

    January 5, 2017 at 7:18 pm #444246
    electrofix
    Moderator

    Re: Zanussi ZVC66030XA Hobs Not Working

    cant find that model model even on google

    whats the pnc

    check the main connector some cookers use links and if they are missing or loose some part of the cooker wont work

    Dave

    January 5, 2017 at 7:40 pm #444247
    jontymox
    Participant

    Re: Zanussi ZVC66030XA Hobs Not Working

    Good evening Dave,

    Thanks for that; the PNC is: 948904093

    January 5, 2017 at 9:07 pm #444248
    electrofix
    Moderator

    Re: Zanussi ZVC66030XA Hobs Not Working

    ah wrong way round ZCV66030XA

    will look it up

    dave

    both simple diags there does not seem to be any stats etc. as i said before must be main term block problem

    just pm’ed you diags etc

    Dave

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.