Hotpoint ultima dishwasher h2o error code

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Hotpoint ultima dishwasher h2o error code

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 9, 2017 at 4:13 pm #90303
    alelym
    Participant

    We have an error message (h2O) on our Hotpoint dishwasher SIUF 2211P ULTIMA, I have checked the water feed connection which is working and the filters on the end of the hose (within the grey connector block)
    but they are clean and not blocked.
    I note there is an electrical valve /motor within this grey connector block which is sealed up and I cannot see a way of testing it to see if it’s working

    Any idea if it’s this part which is the faulty or is there another sensor or motor/pump component part which could give this error code?

    Any help would be welcome
    Allen

    January 9, 2017 at 4:32 pm #444320
    electrofix
    Moderator

    Re: Hotpoint ultima dishwasher h2o error code

    all this means is the machine cant sense water. it could be the valve or the sensor for the water

    when you run on a programme it should
    1 pump for a bit
    2 start filling

    if it start to fill and you can hear water going in its a good chance its the sensor but you cant prove in unless you replace it

    Dave

    January 9, 2017 at 5:42 pm #444321
    alelym
    Participant

    Re: Hotpoint ultima dishwasher h2o error code

    Thanks, yes it does sound like its going to fill but stops as soon as it starts, were abouts is the sensor fitted, any idea if there a part name for it ( ie fill sensor) or part number
    Thanks
    Allen

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.