Reset Bosch WAS

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Reset Bosch WAS

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 13, 2017 at 4:33 pm #90338
    pmb
    Participant

    Replaced Carbon brushes on a Bosch WAS28760gb/14
    Showing fault code F43.
    I tried every reset I know, 6 Press spin turn to 7
    Hold start turn 1 click anti-clockwise
    Hold start turn to 11. Turn to 15 press start for 3 seconds
    This machine has a square display in middle of panel.
    What am I missing?
    It would be good to have a list of model numbers with their
    Reset codes, any have such a thing.

    January 13, 2017 at 4:40 pm #444448
    pmb
    Participant

    Re: Reset Bosch WAS

    Sorry should be on tech

    January 13, 2017 at 7:24 pm #444449
    iadom
    Moderator

    Re: Reset Bosch WAS

    It is now. 😉

    January 13, 2017 at 8:37 pm #444450
    clivejameson
    Participant

    Re: Reset Bosch WAS

    I’ve had a number that seem to be reluctant to reset. The “turn to six then hold the spin button and turn to seven” is AFAIK is the correct procedure…just need persevere a few times.

    I suspect the new brushes don’t make a good initial contact so rotating the drum by hand a lot before trying might help…

    HTH?

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.