hoover dxc c48w3/1-80

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › hoover dxc c48w3/1-80

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 24, 2017 at 5:03 pm #90423
    mikehha
    Participant

    hi all.
    can any of you hoover engineers help me out. This m/c`s display comes and goes when it dose disappear the m/c stops then display comes back on and off we go.checked the wiring and connections all seem tight but the rotary switch seems a bit loose. if not the rotary switch could this be the display board or the lower control card.

    January 24, 2017 at 8:38 pm #444775
    kaibart
    Moderator

    Re: hoover dxc c48w3/1-80

    They have had a few problems with the top module I would try that 1st kai

    February 14, 2017 at 5:44 pm #444776
    mikehha
    Participant

    Re: hoover dxc c48w3/1-80

    Thanks for your reply Kai. changed the top module which came with the rotary switch back now all I can get is the LED display just lights up in a clockwise rotation is this a set up fault do I need to program something or is this a test sequence?

    February 14, 2017 at 8:08 pm #444777
    kaibart
    Moderator

    Re: hoover dxc c48w3/1-80

    It’s probably main module then or check ribbon cable from main module to display pcb

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.