TCFS73BGG(UK)

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › TCFS73BGG(UK)

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 30, 2017 at 7:28 pm #90472
    Profyaffle
    Participant

    Hotpoint Condenser Dryer
    Bleeps with the Empty water/Filter light Flashing, no drum action, no pump action, 240V at the Pump Microswitch, 450Ohms through pump and the wiring to the pump is fine too.
    Typically symptoms of the Pump Housing being clogged up
    Never got a chance to check Motor/Capacitor as I’m going back Wednesday.
    Any Suggestions and or Tech info on this one please.
    Regards,
    Chris

    January 30, 2017 at 10:27 pm #444922
    HotDog
    Participant

    Re: TCFS73BGG(UK)

    did you check stats

    February 1, 2017 at 9:27 am #444923
    Profyaffle
    Participant

    Re: TCFS73BGG(UK)

    Yes

    March 16, 2017 at 5:27 pm #444924
    Profyaffle
    Participant

    Re: TCFS73BGG(UK)

    Turned out it was the stat, double checked it and one of the terminals was loose, Replaced and tested ok. Just noticed, you’re in Dukinfield, Tameside. I used to live on Cheetham Hill Road, on the Dukinfield side not Staley, Moved to Edinburgh 7 years ago. Thanks for the Advice, worst of all though,. I should have noticed before, pressure of pressing down with probe must have helped make contact.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.