Bosch sps53m08gb/03 f19

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch sps53m08gb/03 f19

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 30, 2017 at 9:29 pm #90473
    Cras
    Participant

    Can anybody tell me what f19 relates to , switch it on ,programme time shows then flicks to f19 within a few seconds ,any ideas how to clear fault code Thanks Cras

    January 31, 2017 at 5:58 pm #444925
    Cras
    Participant

    Re: Bosch sps53m08gb/03 f19

    Found this is a board fault caused by either faulty valve or dispenser just for future reference

    January 31, 2017 at 6:45 pm #444926
    nomadPaul
    Participant

    Re: Bosch sps53m08gb/03 f19

    Didn’t see this yesterday .F19 , although officially is dispenser , in reality it’s nearly always the heat exchanger valve. If it goes to F19 as soon as you start it up its valve AND module. If the F19 appears after approx 2 mins , a valve on its own is normally suffecient.

    January 31, 2017 at 7:04 pm #444927
    Cras
    Participant

    Re: Bosch sps53m08gb/03 f19

    Hi thanks , found your older thread earlier today Cras.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.