- This topic has 6 replies, 4 voices, and was last updated 9 years, 1 month ago by
.
-
Posts
-
Got to do a belt change on a Creda 37275.
Its a 3 kg dryer with the flap down door circa 1975. The sides and top are one piece and it looks like it has to come off to get to anything. Can anybody remember doing one of these and have any pointers.
Thank you.Re: One for the oldies 37275
back off
can remember 2 screws each side think there are screws left and right of door some hidden by rubbers
then wrapper just lifts off. from memory hold it at the rear and lift it then use your other hand to tease it out both sides
quite simple when you have done one
Dave
after
Re: One for the oldies 37275
Thanks Dave.
Really appreciate the info I’ll let you know how i get on when I go back. I think you might be showing your age though. 8)Re: One for the oldies 37275
[quote=”electrofix}
quite simple when you have done one
Even easier when you have done lots of them, doesn’t even have the sneaky screw behind the control knob. 🙂
Re: One for the oldies 37275
Blooming heck. All the oldies are out now it’s like moths round a light, better not mention a problem i’m having with a Hotpoint Empress. 😆 :waving:
Re: One for the oldies 37275
Got a Flatley airer circa late 50’s coming in today. The old dear of 90 will not even entertain the thought of a tumble dryer. This must be worse than a Hotpoint tumble dryer if one piece of clothing falls in it’s going to go up in flames.
For you youngsters who don’t know what one of these is I have attached a couple of photos. The image with the hose and bucket is one we repaired here about seven or eight years ago!!
Don
- You must be logged in to reply to this topic.