Lux ES1602x D/w

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Lux ES1602x D/w

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • April 18, 2005 at 8:03 am #9069
    Lawrence
    Participant

    Fault ~ sticks @ 8 o’clock on the dial & trips when turned on

    Machine works on arrival but element showing poor resistance to earth so replaced ,Machine now doesnt trip but still sticks at 8 o’clock crocks clean but full of water is there a stat that I have missed or has the element blown the timer contact ?
    Why do these faults always show up on a friends m/c 🙄

    Lawrence

    April 18, 2005 at 8:53 am #131977
    Dave_Conway
    Participant

    Re: Lux ES1602x D/w

    You sure that’s the right model Lawrence ?

    I’m guessing it’s prefixed with ESI rather than ES1 but I can’t find anything with either 1602 or just 602 on the end.

    Dave.

    April 18, 2005 at 1:47 pm #131978
    Lawrence
    Participant

    Re: Lux ESI602x D/w

    Hi Dave

    Yes it is a ESI 602 X
    911841061 Serial 24150016

    Thanks
    Debbie

    April 18, 2005 at 2:58 pm #131979
    farmboy
    Participant

    Re: Lux ES1602x D/w

    Should be 2 thermostats, one sits in a bracket by the heater and another little one screws into the underside of the tub on r/h/s underneath.

    April 18, 2005 at 3:05 pm #131980
    Dave_Conway
    Participant

    Re: Lux ES1602x D/w

    It looks like there are two stats in it, one temp control and the overheat cut-out.

    Have you looked on the TDS disk for the wiring diagram ? It is on there 😀

    Dave.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.