Hotpoint WML560 no go

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hotpoint WML560 no go

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • March 15, 2017 at 8:18 am #90820
    Seamy
    Participant

    Hotpoint WML560 not doing anything, locks door but nothing else, have checked the usual, pump, heater, valves read ok, think i remember reading something about re-calibrating pressure sensor, but I think this one has old style pressure switch, Any ideas?


    Thanks in advance

    March 15, 2017 at 9:11 am #446069
    electrofix
    Moderator

    Re: Hotpoint WML560 no go

    take it you have checked motor. if its got brushes or not

    no brush contact can cause this

    Dave

    March 15, 2017 at 6:18 pm #446070
    Seamy
    Participant

    Re: Hotpoint WML560 no go

    Looked quickly at machine, am dropping off loan machine and taking it in, will check that then thanks, thought it was brushless type motor though.

    March 15, 2017 at 7:43 pm #446071
    electrofix
    Moderator

    Re: Hotpoint WML560 no go

    Had a quick look on qualtex and they list both which is why I suggested it. I assume some are some aren’t

    Dave

    March 15, 2017 at 9:43 pm #446072
    HotDog
    Participant

    Re: Hotpoint WML560 no go

    if no brushes check door lock prone to burning

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.