Smeg SUK92CMX5 Clock

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #90874
    LittleMan
    Participant

    Hi can anyone help this cooker has a mind of its own for no reason the clock will start flash as if the power had been turned off it will do it if the cooker is in use or not is this the clock ? also can the clock be bypassed ? and how .
    Many thanks Les

    #446296
    electrofix
    Moderator

    Re: Smeg SUK92CMX5 Clock

    if its a basic clock it can be bypassed by bridging the correct wires at the back

    Dave

    #446297
    LittleMan
    Participant

    Re: Smeg SUK92CMX5 Clock

    Thanks for that do you have a diagram of the wires that have to be joined please.
    many thanks
    Les

    #446298
    electrofix
    Moderator

    Re: Smeg SUK92CMX5 Clock

    if you post a clear picture of the back of the clock i should be able to figure it out

    Dave

    #446299
    eastlmark
    Moderator

    Re: Smeg SUK92CMX5 Clock

    sure I answered this yesterday…..
    only 4 wires on the clock it cannot be that difficult for an engineer to work it out. Need the check first its not a bad connection (terminal block or some have multi plugs in the loom that burn out) or the safety toc – look for signs of it melting or burning.

    #446300
    LittleMan
    Participant

    Re: Smeg SUK92CMX5 Clock

    Thank you for your replies as I have not seen cooker I don’t know how many wires go in to the clock this is the reason that im asking so that I can go armed with all the right information. Eastlmark no you didn’t answer this yesterday any way not to me.
    Les

    #446301
    eastlmark
    Moderator

    Re: Smeg SUK92CMX5 Clock

    I defo wrote a reply but must have forgot to press submit or got distracted!

    #446302
    LittleMan
    Participant

    Re: Smeg SUK92CMX5 Clock

    That’s no problem.
    All the best
    Les

Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.