Siemens dishwasher/Just flashes at me!

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Siemens dishwasher/Just flashes at me!

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 22, 2017 at 5:55 pm #90886
    Lonestar
    Participant

    Hi. I have a Siemens dishwasher that won’t go. The ‘tap’ light and the rinse-aid light are both flashing when I switch it on, but it won’t let me select any programs or do anything at all. It seems to be dead. It was an expensive buy, so I’m hoping I can fix it. Any clues please?
    Oh, the model number (which I got off the door edge, so I hope it is correct) is SN26T293GB/25.
    Thanks.

    March 22, 2017 at 7:18 pm #446339
    Martin
    Participant

    Re: Siemens dishwasher/Just flashes at me!

    The error code refers to ‘Communication error between the electronics’.

    Measures to take: Check plug and socket connection into the back of the appliance. And disconnect from power supply (unplug and plug back in).

    If that fails then the diagnosis suggest the main power module is at fault. 🙁

    March 23, 2017 at 8:12 pm #446340
    Lonestar
    Participant

    Re: Siemens dishwasher/Just flashes at me!

    Thanks for the reply Martin.
    I tried what you suggested, but still no joy.
    The main power module is priced at £114.66 on the Siemens web site.
    What with the cost of an engineer as well as any part(s), and the probability that a seven year old dishwasher (that’s had a LOT of use) will be likely to fail again, I think I will cut my losses and get a new one. A new one will be warrantied for at least a couple of years too. Thanks again.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.