candy 1012 won’t heat

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › candy 1012 won’t heat

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • March 23, 2017 at 7:29 pm #90899
    Nick Barton
    Participant

    My Candy CDI 1012/B-80 won’t heat the water. Tested the flow through heater with a multimeter and it reads around 28 ohms. Does this mean the heater is good or not? I have changed the ntc probe and that hasn’t helped and checked the wiring/pcb and they seem fine.

    March 23, 2017 at 9:31 pm #446402
    electrofix
    Moderator

    Re: candy 1012 won’t heat

    28 ohms is fine heater is ok

    there will be a relay on the board that switches the heater on and off that may be faulty
    there will normally be a pressure switch somewhere to make sure heater cannot come on till there is water in it

    Dave

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.