Bosch DW Check Water

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch DW Check Water

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • April 3, 2017 at 8:29 am #90964
    DDDave
    Participant

    Hi,
    We have a Bosch DW SMS50T02GB and it appears to complete the cycle but the Check Water light is always flashing at the end. We have checked the machine several times for excess water to no avail. Sump etc is ok.

    Anybody any ideas??

    Thanks

    April 12, 2017 at 9:32 pm #446601
    Alanj
    Participant

    Re: Bosch DW Check Water

    Hi Dave, possible reed switch flow meter problem? Have you checked for blockages between sump and metering tank? Is the air break on metering tank clear of gunk.

    Alan

    April 12, 2017 at 10:12 pm #446602
    DDDave
    Participant

    Re: Bosch DW Check Water

    Thanks Alan
    I thought it was the reed switch too and replaced it.
    On Monday I found the heater element is the problem even though it has been heating and not tripping the elcb.
    Thanks.
    Dave

    May 15, 2017 at 10:35 am #446603
    DDDave
    Participant

    Re: Bosch DW Check Water

    Hi, We now have another problem with this DW. We replaced the element and motor and all is ok until the end. It is heating fine during the wash but it doesn’t do the final heat at the end to dry the dishes. Everything is cold at the end of the cycle and there is no fault on the screen.

    Can anyone help?
    Thanks

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.