Hot & Steamy: AEG Washer Dryer : 91460610701

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Hot & Steamy: AEG Washer Dryer : 91460610701

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • April 11, 2017 at 1:07 pm #91022
    neilsukwg
    Participant

    Product 91460610701

    All seems fine on the Dryer Components, belt ok water coming through, pump clean etc. but clothes come out hot and steamy and occasionally countdown freezes

    Could it be condenser blockage?
    If so are there any tips for access etc?

    April 11, 2017 at 3:39 pm #446763
    Martin
    Participant

    Re: Hot & Steamy: AEG Washer Dryer : 91460610701

    Hot ‘n steamy got to be either no water flowing through the condenser or the condenser itself blocked with fluff. Tricky to access but OK once you fiddle getting the fan motor off.

    April 28, 2017 at 11:34 am #446764
    neilsukwg
    Participant

    Re: Hot & Steamy: AEG Washer Dryer : 91460610701

    This machine is still playing up:
    Timer jumps at around 30 mins down to 1 minute [on drying only]

    Condenser is now spotless
    Water flowing through on drying cycle
    Pump working normally

    NTC on condenser reading 4.6k ( had been used for drying 20 mins earlier)
    Dryer Heater Insulation 220M ohms

    Suspect Dryer element now but difficult access and customer satisfaction i’d like to be sure….

    May 2, 2017 at 7:41 am #446765
    neilsukwg
    Participant

    Re: Hot & Steamy: AEG Washer Dryer : 91460610701

    Anyone know the normal room temperature ohms reading on the ntc for this machine?
    I thought 4.6 k might be a bit low?

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.