- This topic has 1 reply, 2 voices, and was last updated 8 years, 12 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Hi Guys. Problem with indesit f/f. Module blown due to water ingress. Replaced.
Now fridge is too cold.
All ok in freezer. Removed ‘dynamic air control’ section in fridge. No wires. I suspect the sealed-up polystyrene section has air valve in it, because there is no other fridge air control, but dont want to remove foam tape yet.
Has no connection with previous problem, but started being too cold in fridge immediately after new programmed control module was fitted.
Cant find ‘dynamic air control’ part listed anywhere.
Any ideas? As usual, this module replacement has cost the customer a fair bit, and she aint pleased.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.