Hoover washing machine door lock won’t engage

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Hoover washing machine door lock won’t engage

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • April 18, 2017 at 11:38 am #91058
    zahodge
    Participant

    Last week the washing machine (Hoover DYN 8164 D) tripped the mains electric. Once I’d reset the fuse box the washing machine had power but the door lock wouldn’t engage and wouldn’t start any cycle.
    I replaced the interlock but this didn’t solve the issue.
    Could it be that the electrics inside the washer are damaged and if so is there a way I can fix this myself?
    Thanks for any info.
    Zoe

    April 18, 2017 at 12:04 pm #446895
    Martin
    Participant

    Re: Hoover washing machine door lock won’t engage

    Certainly you will need to check if the electronic programme circuit board has been damaged (it sounds as though it has). Then locate the component that caused it to blow ( i.e. Motor, Heater, Pump etc).

    Good luck but be safe and unplug from the mains first 🙂

    April 19, 2017 at 6:16 am #446896
    kaibart
    Moderator

    Re: Hoover washing machine door lock won’t engage

    I wouldn’t have thought it would have damaged the main pcb but anything is possible I would check motor 1st this is related to the door lock not activating kai

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.