AEG dishwasher F34502V10 PNC 91153911400 pressure switch mod

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › AEG dishwasher F34502V10 PNC 91153911400 pressure switch mod

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • April 19, 2017 at 10:22 am #91071
    Rograbbit
    Participant

    Hi. Hope you are all well. Above dishwasher fills then flashes 6th end light from left every 5 secs. Read about mod. No base leak. Any tech info appreciated, looks like can be changed through front panel? Thank you in advance.

    April 19, 2017 at 10:32 am #446936
    captaincaveman1
    Participant

    Re: AEG dishwasher F34502V10 PNC 91153911400 pressure switch

    If the p/sensor had failed it would of filled the base I think you may have a heating fault . The heater is part of the main motor assy I’d check first as Its not that reliable

    April 19, 2017 at 10:52 am #446937
    Rograbbit
    Participant

    Re: AEG dishwasher F34502V10 PNC 91153911400 pressure switch

    Thank you. Just tested, it’s ok 25 ohms with high insulation. The motor doesn’t kick in though don’t know if it’s registering fault just on a static fill?

    April 20, 2017 at 2:28 pm #446938
    Rograbbit
    Participant

    Re: AEG dishwasher F34502V10 PNC 91153911400 pressure switch

    Still after info on this to be certain if anyone can help?

    April 20, 2017 at 9:07 pm #446939
    eastlmark
    Moderator

    Re: AEG dishwasher F34502V10 PNC 91153911400 pressure switch

    simple once you have done 1. just be careful not to break the mounting clip off the sump when removing the old sensor.. Can be done from front.

    April 21, 2017 at 11:02 am #446940
    Rograbbit
    Participant

    Re: AEG dishwasher F34502V10 PNC 91153911400 pressure switch

    Your most kind. Thank you. Oh the joy of information!

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.