Rangemaster elise 110 energy reg fitting

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Rangemaster elise 110 energy reg fitting

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • April 26, 2017 at 5:05 pm #91129
    mike100
    Participant

    This is a ceramic hob s/n 10032 and trying to fit new reg that customers daughter managed to break.
    Cant c how to take front panel off to access screws for regulator and then to take off hob top to fit part.
    Anyone have any experience of these please
    Mike

    April 26, 2017 at 5:10 pm #447160
    admin
    Keymaster

    Re: Rangemaster elise 110 energy reg fitting

    Hi

    Nope the hob top will need to be lifted and also the hob will probably need recalibrating.

    Bryan

    April 26, 2017 at 5:14 pm #447161
    Lawrence
    Participant

    Re: Rangemaster elise 110 energy reg fitting

    either the side panels come off which reveals 2 retaining screws or if you are lucky there is a rubber cover either side about the size of a £1 coin behind which are the retaining screws, then the deck hinges up revealing the facia screws across the top ,if its induction it will need calibrating other wise its as straight swap

    April 26, 2017 at 7:46 pm #447162
    Mo3426
    Participant

    Re: Rangemaster elise 110 energy reg fitting

    Hi just read your post about the rangemaster what does recalibrating involve as i have yet to deal with an induction version
    Thanks

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.