Zanussi Dishwasher Flooding

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Zanussi Dishwasher Flooding

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • May 20, 2017 at 7:17 am #91286
    smithcd
    Participant

    Hi all

    I have a zanussi ZDV12002FA and I have a flood warning in the bottom tray.

    After drying it out and running briefly with the front panel off there are two small black corrugated drain pipes pulsing water into the tray.

    I cannot for the life of me find where these pipes could be leading to. Are they spillage pipes unintended for use unless in an emergency?

    Any help would be greatly appreciated

    Thank you

    May 20, 2017 at 8:33 am #447646
    Seamy
    Participant

    Re: Zanussi Dishwasher Flooding

    1:- Model number is not correct. Post correct model num’ including 9 digit PNC num’.
    2:- Posted in wrong forum this is washing machine forum, there is a dishwasher forum which you will probably get better feedback from.
    3:- Likely the pressure sensor has gone faulty & is overfilling, the extra water is going into base via tubes you described . There is a modification kit that can be fitted to these, but without correct information to identify appliance we can’t tell whether this applies to your machine or not.

    May 20, 2017 at 9:10 am #447647
    smithcd
    Participant

    Re: Zanussi Dishwasher Flooding

    Oh man… thank you for your help. I have reposted in the dishwasher section


    Mod edit:

    Have deleted the other thread even though it was in the correct forum as this one has had a reply. Moved this one to the correct forum 🙂

    Hope you get the problem sorted.

    Don

    May 20, 2017 at 9:31 am #447648
    smithcd
    Participant

    Zanussi dishwasher flooding

    Hi all

    I have a zanussi zdv12002fa GHE423DA2 (PCN 911 079 006 01) dishwasher that keeps flooding.

    Upon inspection there are two small black drain pipes that are pulsing water when operational and have either come loose or have never joined to anything. I have had the front and base panels off and cannot find the joining point for these hoses.

    Am I missing something obvious? Are these hoses suppose to lead to the base panel to flood and therefore stop the dishwasher working?

    Any help would be greatly appreciated.

    Mods… sorry for the duplicate posts

    May 20, 2017 at 9:59 am #447649
    bazza500
    Participant

    Re: Zanussi dishwasher flooding

    You will probably have to fit the pressure switch modification kit part number 405 53 46-06/0.

    The 2 pipes you are talking about are probably the pipes from the side of the door to the base and are not connected to anything

    May 20, 2017 at 10:15 am #447650
    smithcd
    Participant

    Re: Zanussi dishwasher flooding

    bazza500 wrote:You will probably have to fit the pressure switch modification kit part number 405 53 46-06/0.

    The 2 pipes you are talking about are probably the pipes from the side of the door to the base and are not connected to anything

    Thanks for the reply Bazza. I’ll have a look into the pressure switch kit

    May 20, 2017 at 10:22 am #447651
    iadom
    Moderator

    Re: Zanussi Dishwasher Flooding

    As both threads have had replies I have merged topics. 😉

    Jim.

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.