Zanussi ZKG7125 washer dryer

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi ZKG7125 washer dryer

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • June 6, 2017 at 8:00 pm #91391
    folleyball
    Participant

    Zanussi washer dryer dead.
    Nothing lighting up on the machine.
    Theres mains going into the machine.
    I’m guessing this is a fault with the main PCB.

    Model ZKG7125
    914604042

    June 6, 2017 at 8:24 pm #447909
    kaibart
    Moderator

    Re: Zanussi ZKG7125 washer dryer

    I know this might sound stupid but have you tried disconnecting the dryer heater they give allsorts of faults

    June 6, 2017 at 8:41 pm #447910
    electrofix
    Moderator

    Re: Zanussi ZKG7125 washer dryer

    disconnect everything apart from mains into pcb

    if its dead then its a board problem

    maybe just power supply chip on board if you are up to it

    dave

    June 7, 2017 at 7:26 am #447911
    eastlmark
    Moderator

    Re: Zanussi ZKG7125 washer dryer

    might be worth having a good look at the pcb for blown components or track, may be another issue caused it to pop. As a rule, if you have 230v to the pcb you should get lights or something showing life, if not then pcb had it.

    June 11, 2017 at 10:05 pm #447912
    RHrepairs
    Participant

    Re: Zanussi ZKG7125 washer dryer

    As Kaibart said. disconnect the dryer element. Low insulation cause pcb to appear dead

    September 13, 2017 at 6:33 pm #447913
    adv
    Participant

    Re: Zanussi ZKG7125 washer dryer

    i have one of these … when turn knob on sometimes works sometimes doesn’t … can sometimes see a tiny bit light .. on lcd but sometimes ,, nothing at all ? am thinking the pcb is faulty ? anyone else had luck … fixing them ?

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.