Electrolux EWG14750 e31

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Electrolux EWG14750 e31

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • June 30, 2017 at 2:24 pm #91570
    grooster
    Participant

    Hi,

    I’ve been out to take a look at an Electrolux washer today and the fault code in diagnostics is e31. EWG14750w, Pressure switch problem.
    I’ve tried the machine on a quick rinse and it permormed fine.
    The lady says it always overfills when it gets to 11/12 mins left, with the water up to the door. This is the final rinse, hence why I tried the rinses, problem is the rinse programme on this machine is over 50mins.

    I checked the pressure pipe for holes, blown down it to check for a blockage, all seems fine.
    Has anybody else had one of these new style pressure switches fail on what seems like the final rinse intermittantly or is it going to be a pcb fault.

    I’m going to order the switch and go back armed, but I was just wondering if anybody has had the same.

    Cheers

    Nick

    June 30, 2017 at 4:16 pm #448593
    Hollytree_Technical
    Participant

    Re: Electrolux EWG14750 e31

    Its worth checking that the heating element has continuity and decent insulation resistance as I have had faulty elements bring this fault up before.

    Jem

    June 30, 2017 at 4:23 pm #448594
    grooster
    Participant

    Re: Electrolux EWG14750 e31

    Thanks Jem,
    I have had the heater put different codes up when theres a short to earth on these. I must admit I didn’t check it, but this does actually overfill. Water up to the top of the door.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.