Zwd16270w1 dryer countdown too fast

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zwd16270w1 dryer countdown too fast

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • July 24, 2017 at 7:31 pm #91759
    Simon46
    Participant

    Got this one pnc 91460403001 not drying. Timer counts down too fast. Clothes coming out wet. Replaced inlet valve. Any ideas?

    July 24, 2017 at 11:11 pm #449152
    aqualectric
    Participant

    Re: Zwd16270w1 dryer countdown too fast

    Check the thermistor wiring in the lower hose. The wiring can break off. Run diagnostics and see if a relevant fault code appears – usually E60 family of codes. The diagnostics in drier mode shows the temperature of the NTC at the top duct near the heater and then the temperature of the lower hose NTC alternating. Also check heater element for continuity and earth faults – Lux stuff is notorious for drier and wash programs shutting down too early if the drier element has even a small earth fault.

    Hope that helps,

    Steve.

    July 25, 2017 at 5:09 am #449153
    Simon46
    Participant

    Re: Zwd16270w1 dryer countdown too fast

    Thanks Steve. Have you any info you could send me as im unsure how to do this.
    Regards Simon

    July 25, 2017 at 7:44 am #449154
    Simon46
    Participant

    Re: Zwd16270w1 dryer countdown too fast

    Thank you Dave. E73. Dryer heaters meggered at 300 to 400 ohms. Front duct ntc should be 4.7-5.3k at 20c. Its 5.8. Out of stock at qualtex. Lower ntc perfect as read from dryer module.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.