D63 Indesit Dishwaser problems

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › D63 Indesit Dishwaser problems

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • April 24, 2005 at 10:47 am #9180
    shaunston
    Participant

    When I purchased my indesit d63 dishwaser 2 years ago, I knew that I should of paid extra for a bosch, but luckily, until now I have not experienced any probelms….

    Now whenever I turn the dishwasher on, the lights come on and nothing happens apart from that inside the dishwasher, it starts to get warm?!

    Does anyone have any ideas as to what my problem could be and a poss solution? I’ve been told its my motor?!

    Thanks

    Shaun

    April 24, 2005 at 11:28 am #132860
    Penguin45
    Participant

    Re: D63 Indesit Dishwaser problems

    What sort of nothing happens? Nothing at all, fill no circulation? No fill but motor running? Certainly if the heater comes on it thinks it has water inside…..

    Bit more info please.

    Regards,
    Penguin45.

    April 24, 2005 at 1:14 pm #132861
    gegsy
    Participant

    Re: D63 Indesit Dishwaser problems

    Hi
    I would imagine either wash pump is jammed or more likely the water seal of the motor has failed and seized the pump or start capacitor on side of motor failed.
    In any case if you are to venture (personally I would cut my losses and go bosch) always disconnect from mains :zap:

    Greg

    May 9, 2005 at 8:33 pm #132862
    admin
    Keymaster

    Re: D63 Indesit Dishwaser problems

    Yes! Mine has just done exactly the same thing and was bought at about the same time!!! Yes it is (so my father-in-law tells me – him being a clever sod) the pump motor>

    June 2, 2005 at 11:29 pm #132863
    admin
    Keymaster

    Re: D63 Indesit Dishwaser problems

    Hi Dudes
    My Niece Has a D63 with a faulty drain pump. she had a guy look at it and he said it wasnt worth fixing as the motor wasnt spinning and would not be economical to repair it, Ok that maybe good advice but this machine has hardly been used (6 months use tops), I took a look at it myself and tested the drain pump motor, yep it was knackered indeed it was spinning eraticlly backwards & forwards.

    My Question is: Is it worth rapiaring the dishwasher if I Buy the part and fit it myself. ?

    I have searched the internet for a pump but there like rockin horse turds, cant find em anywhere. any suggestions guys ?

    Pjay

    June 3, 2005 at 12:12 am #132864
    Penguin45
    Participant

    Re: D63 Indesit Dishwaser problems

    Ok, assuming diagnosis is correct, drain pump is p/no C00090533, about £20 plus the dreaded VAT IIRC – an email to spares@ukwhitegoods.com will get one promptly for you.

    Two things to consider:

    Firstly, to fit the pump, all the panels have to come off – lid, sides, kick boards, cheek pieces – the lot. A masterpiece of designThen, you can get the undertray off………

    Secondly, seeing as this is a Public Forum, let’s be polite and say that these are not the best quality appliances, do you really want to start spending on it at this early stage of its career?

    Needless to say, if you are going further into the machine, pull the plug first :plug:

    Regards,
    Penguin45.

    June 3, 2005 at 1:17 am #132865
    pjay
    Participant

    Re: D63 Indesit Dishwaser problems

    Thanks for the speedy reply Penguin45. I got to the pump ok, took the thing of and put a lead directly to it to test it. Thanks for the part info, I suppose its worth fixing for under £25 🙄 , if other things start going wrong after that then I will advise her to get a better quality built one 🙂 .

    Cheers
    Pjay

    BTW Dig the location….Soviet Republic of Yorkshire 😆 😆

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.