Samsung WF70F5E2W4W Washer problem

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Samsung WF70F5E2W4W Washer problem

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • August 28, 2017 at 10:02 am #92014
    wazhead
    Participant

    Hi there, I like having a tinker when things go wrong. It makes me feel like a big man (which is good, because I am). Anyway, I have one of these machines and, when I start a cycle, it activates the lock, pump (for the normal amount of time), then again (for a short burst), then fills, which is all as normal. Then, when the motor should start to spin, 50{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} of the time it doesn’t: it just sits there for hours. No error codes or anything.
    I’ve tried the water pressure sensor- had it out and tested all combinations of pins for resistance while blowing/sucking. diaphragm is ok but no resistance change. 2.4v at the connections though.

    Has anyone got any ideas: I’m stumped! I like things when they work OR don’t work; I hate intermittent!

    Thanks in advance

    August 28, 2017 at 1:51 pm #450021
    1totalshambles
    Participant

    Re: Samsung WF70F5E2W4W Washer problem

    There`s 2 versions one ends with EU other one EE. EU more common.EE I`ve never seen.
    Most likely it`ll be the motor brushes worn out. Motor is a Ceset lookalike so if ,as is usual with this kind of stuff, motor brushes aren`t listed as a separate part and the motor brushes are the culprit and worn out a pair of ceset brushes should sort it out. However nothing is easy in this old game because there are 2 main types that look identical: one brush angle is cut to the left and one is cut to the right if looking with the brush wire terminal pointing downwards so take note of that point.

    August 28, 2017 at 8:03 pm #450022
    Lawrence
    Participant

    Re: Samsung WF70F5E2W4W Washer problem

    Is it akasys on the same cycle as the woollens and delicate cycles on these barely tumble

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.