Hotpoint WF220 – Power & Time saver lights flashing

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Hotpoint WF220 – Power & Time saver lights flashing

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • August 29, 2017 at 2:43 pm #92023
    flashcash
    Participant

    Hi Guys,

    I have a Hotpoint WF220 Washing Machine with no motor action.
    It powers on ok with power, door lock and wash lights lit.
    No motor action, no fill, then pump kicks in after 30 sec approx.
    Power light and Time saver light flash quickly.
    Brushes look ok, no motor action on rinse or spin.

    Any advice welcome.

    Thanks.

    August 29, 2017 at 4:19 pm #450040
    iadom
    Moderator

    Re: Hotpoint WF220 – Power & Time saver lights flashing

    Moved you to correct forum. 😉

    You need to tell us by number from top to bottom which of the five, left hand vertical lights is flashing ingnoring the power light.

    August 29, 2017 at 5:17 pm #450041
    flashcash
    Participant

    Re: Hotpoint WF220 – Power & Time saver lights flashing

    Thanks for the quick response 😀

    It’s the 4th light from the top in the bank of 5.
    1 : Mini Load.
    2 : Reduce Creases.
    3 : Rinse Hold.
    4 : Time Saver – Flashing.
    5 : Extra Rinse.

    August 29, 2017 at 5:28 pm #450042
    iadom
    Moderator

    Re: Hotpoint WF220 – Power & Time saver lights flashing

    Bad news sadly,

    F01. Motor triac short circuit, check all motor and module wiring connections. If no loose contacts the main pcb is at fault. 🙁

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.