Help – Fridge Freezer diagnostic needed- got data

Home › Forums › Public Support Forums › Help And Support › Fridge And Freezer Forum › Help – Fridge Freezer diagnostic needed- got data

Viewing 1 post (of 1 total)
  • Author
    Posts
  • September 4, 2017 at 9:15 pm #92071
    Tevja
    Participant

    Hello All,

    Im new on here, it all looks good!

    I have a Kenwood kff2ds14 FF. 10 seconds after turning on the unit shorts out the electrics in the house,

    I have tried unplugging the defrost heater element and it still trips.

    I took off the condenser starter and have tested the three pins, the readings were:

    Com-Start = 15.0 ohm
    com-Main = 18.5 ohm
    Start-Main = 33.5 ohm

    The overload protector has a reading of 1.5ohm

    Would this suggest the condenser has failed?

    Many thanks.

    Tevja.

  • Author
    Posts
Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.