AEG washer dryer.

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › AEG washer dryer.

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • April 26, 2005 at 4:47 pm #9235
    ChrisR
    Participant

    Hi guys.

    I`ve had a customer ring me with the above machine and she says its flashing E20 when the drier is being used. E20 I`m told is a pump fault but she says it works OK during the wash programmes.

    I have no idea what the model number is.

    I`m due to call on Friday so if anybody has any ideas…..

    Thanks again.

    Chris.

    April 26, 2005 at 5:00 pm #133114
    Dave_Conway
    Participant

    Re: AEG washer dryer.

    It’ll be a Zanussi clone.

    Probably a blocked pressure bottle ?

    Dave.

    April 26, 2005 at 5:28 pm #133115
    ChrisR
    Participant

    Re: AEG washer dryer.

    Thanks Dave……….and for the DE Deitrich info. 😀

    April 27, 2005 at 8:50 pm #133116
    Flyman
    Participant

    Re: AEG washer dryer.

    If it’s only happening on the dry then it could be the pump cutting out on it’s thermal cut-out as it runs for long periods of time. Check there are no blockages and they have not extended the drain hose. If you go into the fault system when you get there it should give you a more definite fault code like E21, E22, E23.

    April 27, 2005 at 9:05 pm #133117
    ChrisR
    Participant

    Re: AEG washer dryer.

    Thanks Flyman. 😀

    April 28, 2005 at 7:10 pm #133118
    Flyman
    Participant

    Re: AEG washer dryer.

    Also check the dryer condenser duct. 😕 I don’ know why but if the duct is blocked it will come up with a drain error code.

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.