- This topic has 5 replies, 3 voices, and was last updated 8 years, 5 months ago by
.
-
Posts
-
Good afternoon,
Wondering if there is an “official way” of renewing the above rubber hose and plastic sleeve on the above washer/dryer?
The original was split and leaking, and I attempted to remove and renew the above in situ’ before deciding it was impossible to do so.
So, I removed the inner drum hoping to be able to fit relatively easily.
However, I’ve now created a small split in the new hose trying to re-fit the plastic sleeve, due to the sharp drum aperture!
A new hose will hopefully be arriving tomorrow, and would welcome any advice especially as the plastic sleeve doesn’t seem very secure when in place.
Kind regards
Re: Bosch WVF2402GB/02 Condenser Tank to Outer Tub Hose
Ah I knew my tube of KY jelly would help someone someday. I’ve no use for it these days. 🙁
Re: Bosch WVF2402GB/02 Condenser Tank to Outer Tub Hose
If that is the best an “Appliance Master” can come up with, perhaps he shouldn’t comment?
Jon
Re: Bosch WVF2402GB/02 Condenser Tank to Outer Tub Hose
jontymox wrote:If that is the best an “Appliance Master” can come up with, perhaps he shouldn’t comment?
Oh lighten up Jonny. The collar just needs a little ‘lubrication’ for ease of fit. KY an excellent lubricant but Fairy Liquid will do.
Yours sincerely ‘The Appliance Master’ 😉
Re: Bosch WVF2402GB/02 Condenser Tank to Outer Tub Hose
Ha, ha,
I managed to nick the new hose’s inner lip on the tub radius when fitting the new, modified plastic collar, and don’t wish a repeat; hence this query.
Have found that the above collar is a difficult and tight fit, (even with fairy liquid) so will de-burr the tub and try again with a little more fairy liquid, although I realise other lubricants are also available.
Kind regards
Jon
- You must be logged in to reply to this topic.