AEG Built in single oven B3101-5

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › AEG Built in single oven B3101-5

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • October 24, 2017 at 3:09 pm #92472
    DerekMat215
    Participant

    I have just replaced the ZN Limiter after total oven, light failure. The oven was working fine but now the oven has stopped heating up and will only go to around 50 degrees. The grill is working and so is the oven light. The Rotitherm works and heats the oven up via top grill unfortunately the actual oven will not heat up any info would be greatly appreciated Thanks in advance DerekMat215

    October 24, 2017 at 3:33 pm #451383
    Martin
    Participant

    Re: AEG Built in single oven B3101-5

    I’d check out the fan element then as the main suspect.

    October 25, 2017 at 8:35 am #451384
    DerekMat215
    Participant

    Re: AEG Built in single oven B3101-5

    Thank you Martin will let you know how I get on…

    October 28, 2017 at 2:31 pm #451385
    DerekMat215
    Participant

    Re: AEG Built in single oven B3101-5

    Martin, PNC 944185470 Both fans are working along with oven light, grill elements and thermostat. Oven temperature checked and is OK. Problem is it will not heat oven up for Convection cooking although both fans operate, for Rotitherm it works fine and cuts in and out at desired temperature. Possible selector switch problem? I’m in the last chance saloon here!

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.