Beko W/Mach Clearing Error Codes

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Beko W/Mach Clearing Error Codes

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • November 30, 2017 at 10:26 am #92742
    BarryofBerko
    Participant

    Hi
    I have a Beko WMI 81341 Washing Machine that has had a hair clip stopping the pump impeller from turning.
    I have removed the clip and the impeller now turns, however, the display shows the following [00:39 e]. The machine makes a rumbling sound and that’s it. Could you please advise? Barry

    November 30, 2017 at 11:07 am #452046
    electrofix
    Moderator

    Re: Beko W/Mach Clearing Error Codes

    that’s not an error code. that’s the time left on the last programme run. will it reset ?

    does the pump now run. if yes have you tried putting a few pans of water in and see what happened

    Dave

    November 30, 2017 at 12:00 pm #452047
    BarryofBerko
    Participant

    Re: Beko W/Mach Clearing Error Codes

    Hi Dave
    Thank you for your response but I cant reset the timer. If I try another programme it does not respond either.
    It has drained out the 4 litres of water I put in the drum but seems to be stuck on a draining programme even when I select a quick wash from the dial. Barry

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.