Beko DL1243APS dishwasher

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko DL1243APS dishwasher

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • December 10, 2017 at 8:14 pm #92813
    Gary59
    Participant

    Can anybody assist.
    Above model is dead.Voltage to and through on/off switch, and up to module.
    Changed module, but no change! I have checked for broken wires etc but cannot sort. I know you can get this scenario on Electrolux group washer dryers if dry heater goes to earth, but again this is okay.Is there a known fault for this?
    Any help appreciated.

    December 10, 2017 at 8:59 pm #452274
    electrofix
    Moderator

    Re: Beko DL1243APS dishwasher

    you say you have voltage to the on off switch but the unit wont work unless you have a neutral as well
    if all wires are live you have lost the neutral

    Dave

    December 11, 2017 at 9:21 am #452275
    Gary59
    Participant

    Re: Beko DL1243APS dishwasher

    Thanks Dave,this model only has two wires, one in and one out of the switch

    December 11, 2017 at 10:00 am #452276
    electrofix
    Moderator

    Re: Beko DL1243APS dishwasher

    even though the switch is single pole the board will need a neutral to be able to power up.
    you need to check the board is getting both

    dave

    December 11, 2017 at 3:01 pm #452277
    Gary59
    Participant

    Re: Beko DL1243APS dishwasher

    Yes it is Dave, 230 volts to the board, which is why I thought it must have been the board, but still same on replacing.

    December 12, 2017 at 12:22 am #452278
    electrofix
    Moderator

    Re: Beko DL1243APS dishwasher

    your not with me

    for a circuit to work it need both a 230volt supply and a 0volt neutral. if you lose the neutral you will still have 230 volts at the board but it wont work

    Dave

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.