Bosch dishwasher module

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bosch dishwasher module

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • December 20, 2017 at 6:27 pm #92887
    telemek
    Participant

    Can anyone help me with this, A Bosch S4443N6GB/01 dishwasher which I replaced the control module and it now works but runs for about twice the time it should and unsure if it is working properly. The instructions show how to re-code the module but dont know what code to enter. Any ideas please.

    December 20, 2017 at 7:28 pm #452478
    Martin
    Participant

    Re: Bosch dishwasher module

    The model number you gave has a control module (part no 00490049) that does NOT need ‘coding’. The instructions included with the part refer to a mod relating to Sicasym. You can ignore that completely as it is not relevant.

    As for it taking longer, that may be a separate issue. Perhaps it’s not heating or there’s a fill problem?

    Can I ask why you changed the control module?

    December 21, 2017 at 8:42 am #452479
    telemek
    Participant

    Re: Bosch dishwasher module

    Thanks for your reply, I assumed that it was needing re-coding so thanks for the info, the origional problem was the heater relay dry joint problem which I re soldered but still would not go through the cycle so maybe there is another fault.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.