Beko WMB81243LB

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko WMB81243LB

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • December 29, 2017 at 5:19 pm #92937
    Toni
    Participant

    Hi,
    This machine fills and drains at the same time even on the spin programme.
    I suspect the main pcb controller, but would appreciate if anyone has had one before if this is the problem ?
    I have tested the heater for earth leakage, valves, pump and motor
    The customer has changed the pressure switch already
    I will not order anything until Tuesday now
    Any help would be very much appreciated

    December 29, 2017 at 11:08 pm #452648
    electrofix
    Moderator

    Re: Beko WMB81243LB

    have pm’ed you the test info but it does sound like a board problem

    Dave

    December 30, 2017 at 6:05 am #452649
    Toni
    Participant

    Re: Beko WMB81243LB

    Thank you Electrofix much appreciated

    December 30, 2017 at 8:01 pm #452650
    bazza500
    Participant

    Re: Beko WMB81243LB

    Just done one this week with exact same symptoms. Board fixed it.

    December 30, 2017 at 9:38 pm #452651
    Toni
    Participant

    Re: Beko WMB81243LB

    Thank you, i have ordered a new board

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.