AEG td brush fitting

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › AEG td brush fitting

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 9, 2018 at 11:29 am #93012
    mike100
    Participant

    What is the way to fit brush to this td.
    The model is T56830 and pnc 916096091.
    The brush part no. is 1125478006
    thanks
    Mike

    January 9, 2018 at 12:15 pm #452906
    electrofix
    Moderator

    Re: AEG td brush fitting

    are you sure brush has failed ?

    have pm’ed you the manual not a lot of info but it looks like its fitted at the front so it may well be a drum out job

    Dave

    January 10, 2018 at 7:40 am #452907
    mike100
    Participant

    Re: AEG td brush fitting

    it stops after about 10 seconds but runs ok on timed dry so thought it was the bushes

    January 10, 2018 at 3:33 pm #452908
    electrofix
    Moderator

    Re: AEG td brush fitting

    you should be able to do a continuity test from panel to drum front half

    there is also another brush in the rear bearing

    Dave

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.