- This topic has 2 replies, 2 voices, and was last updated 8 years, 2 months ago by
.
-
Posts
-
model number DPG15B1NXUK fills for a couple of minutes the salt light flashes and 1st and 3rd light on solid and it pumps,
it only has 3 lights and the salt light.
no leaks in base any thoughts?Re: indesit semi integrated dishwasher
I think this is the correct data –
LED 1 & 3 Pressure Switch
The machine has filled with 2.5 litres of water but the pressure switch is still in the
empty position.
• Check the filter or sump is not blocked.
• Check the pressure switch is not stuck in the empty position (contacts 11-12) or the
pressure chamber or air tube are either blocked, unattached or split.
• Check the wash pump is circulating the water.
• Check the wiring to the pressure switch.
• Check the edge connector blocks on the pressure switch and module card.
• Check the outlet hose is not too low causing the machine to siphon.
• Aborts the cycle and energises the drain pump.
- You must be logged in to reply to this topic.