Beko WDIR7543101

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko WDIR7543101

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • February 14, 2018 at 4:46 pm #93329
    timdowning
    Participant

    Beko WDIR7543101

    Integrated washer dryer.

    Apparently screen goes off part way through cycle??

    Is there a test cycle available please.

    Cheers

    Tim.

    February 14, 2018 at 6:22 pm #453953
    electrofix
    Moderator

    Re: Beko WDIR7543101

    sorted

    have pm’ed you the test and trouble shooting manual

    if you need the complete manual which includes above and more info on components would need an email for that, its too big

    Dave

    February 14, 2018 at 6:26 pm #453954
    timdowning
    Participant

    Re: Beko WDIR7543101

    Excellent, I’ll see how I go with the concise version.
    Cheers.

    February 21, 2018 at 6:32 am #453955
    timdowning
    Participant

    Re: Beko WDIR7543101

    Just an update on this –

    By the time I got to see the machine it had worked perfectly for a couple of goes.

    I thought I would run it in service mode but the combination of buttons it suggested didn’t work??

    I then set about checking all cables but unfortunately no breaks found.

    The only thing I did notice were signs of water leaking from the little vent on top of the dryer heater box. I guessed that this could be causing water to drip down onto the module at the bottom right Not wanting to block the vent hole up, which I was tempted to do, I fitted a 2 inch piece of rigid rubber hose on it so that hopefully the height of the hose would be enough for water not to make its way up…

    We shall see.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.