Beko WDX8543130B washer dryer

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko WDX8543130B washer dryer

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • February 14, 2018 at 8:59 pm #93330
    folleyball
    Participant

    18 month old washer dryer.

    At any random point on any programme, the lights go out on the display panel and the pump starts running continuously.

    Sometimes it will complete a programme but 90{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} of the time this fault occurs.

    I’m guessing circuit board or the electronic motor. Or could it be a component on the dryer section?

    The lady had 6 different engineers out to this machine when it was under guarantee and they never resolved this problem!!!
    One replaced the pcb.

    February 14, 2018 at 11:19 pm #453956
    electrofix
    Moderator

    Re: Beko WDX8543130B washer dryer

    that’s the second one with displays going off but your adds a pump 2

    will pm you fault finding

    Dave

    February 15, 2018 at 7:03 pm #453957
    folleyball
    Participant

    Re: Beko WDX8543130B washer dryer

    Thanks Dave I shall have a read through tonight.

    Having a nightmare with Beko machines at the moment.

    Another DW603 dishwasher today with a broken wire. Fixed that, and now the machine fills, runs for a few minutes then empties, and just continues to do that. Tried a new circuit board, but still the same. I’m baffled!!!

    February 15, 2018 at 7:40 pm #453958
    kaibart
    Moderator

    Re: Beko WDX8543130B washer dryer

    Only been out to 2 of these washer dryers and wires to dryer ntc where broken but I’m pretty sure the dryer has a separate module so my guess would be motor or pcb If it’s got a brushless motor would be more inclined to go with that

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.