aeg f34502v10 dw 91153911400

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › aeg f34502v10 dw 91153911400

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • February 27, 2018 at 12:34 pm #93423
    mikehha
    Participant

    Has anyone had an intermittent heat fault on this dishwasher and have you managed to cure it I am reluctant to order the rear power board at electrues price.

    February 27, 2018 at 1:38 pm #454280
    electrofix
    Moderator

    Re: aeg f34502v10 dw 91153911400

    when it does fail any fault code

    wont be shown to user so you have to go into service mode

    Dave

    February 28, 2018 at 3:19 pm #454281
    mikehha
    Participant

    Re: aeg f34502v10 dw 91153911400

    no lights flash it just stays on the heat program for three hours then the next wash it might be fine but I dont think it gets to the correct temperature.Have had the board out to check for dry joints also checked the relay.But I could be checking on a good day.
    mike

    March 7, 2018 at 8:41 am #454282
    mikehha
    Participant

    Re: aeg f34502v10 dw 91153911400

    dave How do you get in to the service mode on this m/c thanks mike

    March 7, 2018 at 9:37 am #454283
    electrofix
    Moderator

    Re: aeg f34502v10 dw 91153911400

    have pm’ed you some tech

    Dave

    September 19, 2018 at 1:58 pm #454284
    DPDOM
    Participant

    Re: aeg f34502v10 dw 91153911400

    Bit late for you but I’ve had this when pressure switch was blocked and there was too much water inside.
    Dave

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.