- This topic has 3 replies, 2 voices, and was last updated 8 years ago by
.
Viewing 4 posts - 1 through 4 (of 4 total)
-
Posts
-
Washers OK until the start of the heating part of the program, then the machine stops full of water and the display shows a 1.
Wash element checks out OK. Disconnected drier elements – same fault.
Diagnostic test shows a E66 error.
This machine has a PCB 973914604048012 behind the command panel and a relay board 1324478203.
Anyone had this fault?Re: Zanussi ZKG7145 914604048/01
have sent you diagnostics info
E66 is a heater relay closed error. have you checked heater insulation resistance ?
Dave
Viewing 4 posts - 1 through 4 (of 4 total)
- You must be logged in to reply to this topic.