Beko WMI71641 Contro PCB part number

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Beko WMI71641 Contro PCB part number

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • April 13, 2018 at 4:21 pm #93716
    Twoten
    Participant

    I am trying to get the part number for the control PCB for a Beko WMI71641 Washing Machine serial No: 12-610273-09
    According to connect here appears to be 2 versions.
    5045382360149 which is a new version
    5045176538143 listed as old version
    I have also managed to find 5045179646036 (OPN: BEK2824447031) which is also listed as an old version.
    Can someone clarify which is the correct PCB for this machine please?

    April 13, 2018 at 5:01 pm #455336
    electrofix
    Moderator

    Re: Beko WMI71641 Contro PCB part number

    this should help

    in the part listings its listed as part no 2427807031

    but read the enclosed bulletin

    Dave

    April 13, 2018 at 5:28 pm #455337
    Twoten
    Participant

    Re: Beko WMI71641 Contro PCB part number

    Cheers Dave,

    I’m assuming this was manufactured 09-2012 therefore according to the info it uses the old board.

    Unfortunately this doesn’t give full part numbers for the PCB’s; I have part numbers for 2 old version PCB’s so are either correct?

    April 13, 2018 at 5:41 pm #455338
    electrofix
    Moderator

    Re: Beko WMI71641 Contro PCB part number

    this is the spares page for this machine

    only 1 part no listed

    Dave

    April 13, 2018 at 6:09 pm #455339
    Twoten
    Participant

    Re: Beko WMI71641 Control PCB part number

    electrofix wrote:
    only 1 part no listed

    According to Connect this is listed as the ‘New Version’ and looking at the picture has 2 plugs as also indicated on the technical bulletin for the new version.
    The explanation on the tech bulletin states the two versions are not interchangeable.

    April 13, 2018 at 6:14 pm #455340
    electrofix
    Moderator

    Re: Beko WMI71641 Contro PCB part number

    you need to look at the board that is fitted now

    there is an extra connector on the new board as per picture

    Dave

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.