Baumatic Spares

Home › Forums › Public Support Forums › Help And Support › Cooker And Oven Forum › Baumatic Spares

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • May 4, 2005 at 9:08 pm #9382
    admin
    Keymaster

    I have successfully repaired my Beaumatic B180 oven by replacing the control switch, but the replacement part I was sent was a “4position + off” whereas the original was a “5 position and off” but Baumatic say they don’t do a 5+off.
    Both blocks had the same connectors, so I put the wires in the same place, but only one switch position works… anyone have a wiring diagram for these switches?

    ALSO: The Campini Ty60 (T210) 35-99 150°C part has blown, anyone know where to source this part?


    Rgds
    Steve

    May 5, 2005 at 11:17 am #133766
    admin
    Keymaster

    Re: Baumatic Spares

    Don’t worry, all sorted….

    Got the Campini part for £1.62 (instead of Baumatic’s £20.02)
    Got the selector switch for £16.80 (instead of Baumatic’s £46.27)

    Feel happy now I’ve made that saving… but I wonder if Baumatic will refund the £30 for the wrong selector switch they sent me??


    Steve

    May 5, 2005 at 11:29 am #133767
    Dave_Conway
    Participant

    Re: Baumatic Spares

    Steve_UK wrote:
    Got the Campini part for £1.62 (instead of Baumatic’s £20.02)
    Got the selector switch for £16.80 (instead of Baumatic’s £46.27)

    May I ask where from Steve ?

    Dave.

    May 6, 2005 at 2:46 pm #133768
    admin
    Keymaster

    Re: Baumatic Spares

    OK, the Campini Thermal cut-out wasn’t actually a replacement Campini part but an equivalent manufacturer, but still the same design and the right specs. I got a 150°C one, but they come in various temperatures.

    I actually ended up getting the 5+off selector for only £13.76, (whirlpool use the same switch).

    I’ve noticed a few posts asking about that damn Campini part, maybe there’s a market, what shall we say…. half Baumatic price?


    Rgds
    Steve

    May 6, 2005 at 3:07 pm #133769
    Dave_Conway
    Participant

    Re: Baumatic Spares

    No, I know where to get them I just wondered if it was the same place 😉

    Make sure the Amperage or higher is the same of course.

    Dave.

    May 6, 2005 at 3:19 pm #133770
    admin
    Keymaster

    Re: Baumatic Spares

    It’s rated at 10A which is same as the Campini part. Even though the oven has a 13A fuse?

    Charlie Papa Charlie (is that too obvious) 🙄

    February 28, 2006 at 8:34 am #133771
    gazbo007
    Participant

    Re: Baumatic Spares

    Where do I get a the correct simmerstat for a Baumatic B10. Baumatic, as usual, have sent me the wrong one as it is too big to fit in the plastic housing, they tell me it can be replaced individual.

    February 28, 2006 at 11:15 am #133772
    Dave_Conway
    Participant

    Re: Baumatic Spares

    They do have one spares distributor but they are wholly reliant on Baumatic themselves, so back to Baumatic I’m afraid as they are the only place to get spares for their own products ultimately 🙁

    Dave.

  • Author
    Posts
Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.