Bent transit bolts in unused Beko washing machine

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Bent transit bolts in unused Beko washing machine

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • May 12, 2018 at 12:12 am #93900
    guitarra
    Participant

    We recently had a Beko washing machine delivered (model WTB741R2W), and having read the manual (and looked at the video Beko created to demonstrate setup/installation) I removed the transit bolts as per their instructions. I’ve found that all 4 bolts are bent to some degree, with 1 in particular at about a 20 degree angle – see photo.

    I don’t think this is typical, but is it a problem? It implies that the machine has taken quite a whack at some point in transportation, although there is no obvious external damage.

    May 12, 2018 at 12:21 am #455868
    electrofix
    Moderator

    Re: Bent transit bolts in unused Beko washing machine

    its the tub that would need checking. check for cracks in the plastic where the bolts screw in

    Dave

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.