Ise aw23 re- spares

Re: Ise aw23 re- spares

Pity you didn’t know a couple of weeks ago Cliff, I took four boxes of ISE spares down to Bryan in Luton on my way to watch the FA cup final.

As the machine is an Amica then spares are easy to source,

Most common leak point on these is the detergent inlet hose, it rubs away on the top of the drum, right under the dispenser.
Often damaging the suspension unit at the same time.
I always stretch the small restraint spring at the back to stop the drum catching the hose.

This is the hose if you need it, a bit of a PITA to get the clips back on.
https://shop.ukwhitegoods.co.uk/8010537 … o-tub-hose

Jim.

Re: Ise aw23 re- spares

Dead easy to work on, if it is that hose then I usually remove the dispenser to aid access. Just take off the top, remove the three screws going into the front of dispenser, remove the two screws holding the top of the facia and metal bar taking note of the position of the bar then front facia will gently ease off.

Jim.

PS. Sent you a PM earlier as well.

Re: Ise aw23 re- spares

Usually possible to adapt a bog standard double valve, leaking from dispenser top???

Sometimes leak from were the overflow hose is pushed into the back of dispenser, never had to change a dispenser top before.?

If you look at the Amica parts list you may find something or get in touch with Bryan ( r600a) he will have both of those parts amongst the stuff I dropped off a few weeks ago.

r600a