- This topic has 4 replies, 3 voices, and was last updated 7 years, 9 months ago by
.
-
Posts
-
This machine is rather puzzling, I supplied it brand new 3 years ago. The fault according to owner that it starts and washes for ten mins then it stopped. The display light remains on. She says it seems to apply to all wash programs (in my view that requires heating).
I thought perhaps heater failure, checked the heater and it’s fine, the wiring loom which is also fine. Have a hunch that heater relay switch may have packed up on pcb?
Need to be sure before forking our £150 plus on pcb. Any thoughts?
Re: Samsung WF90F5E3U4WEU stopped 10 mins
even if the heater relay had failed I would have expected the drum to continue to turn
still think pcb but think its more than a heater relay
the only long shot I can think of is water valves but with no fault codes I doubt it
does it do the same on the rinse programme ?
Dave
Re: Samsung WF90F5E3U4WEU stopped 10 mins
Rinse program went through effortlessly from start to finish
Re: Samsung WF90F5E3U4WEU stopped 10 mins
Have you tested whether the element gets a live feed? Often the relay switches the neutral and as such the live still gets to the element.
Dont quote me on that though, just something I would check…
Also, worth cross referencing the kOhms of the thermal sensor?
- You must be logged in to reply to this topic.