Fridge door can be opened easily straight away after closing

Home Forums Public Support Forums Help And Support Fridge And Freezer Forum Fridge door can be opened easily straight away after closing

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #94158
    Jason167
    Participant

    Hello,

    I’ve just purchased a new AEG integrated fridge freezer. Model SCE818VTS. I’ve installed it myself. Both the fridge door and freezer door close fully.

    After I close the fridge compartment door, I can then open it straight away without any resistance at all. Is this right?

    #456612
    electrofix
    Moderator

    Re: Fridge door can be opened easily straight away after clo

    not sure what u mean

    when you say no resistance how much are you looking for ?

    as long as the seal is in contact all the way round I don’t see any problem. if you have been used to a self defrosting fridge freezer some of these can hold the door closed as the warm air contracts when you close the door

    Dave

    #456613
    Jason167
    Participant

    Re: Fridge door can be opened easily straight away after clo

    Thanks for your reply Dave

    In the past, all fridges and freezers I’ve had, have been difficult to open the door for about 10 to 15 seconds after the door is closed. As you say, “they hold the door shut”.

    On this AEG model, the freezer compartment acts exactly like that; it holds the door shut for about 10 to 15 seconds after the door is closed. However the fridge compartment doesn’t do this. I can close and open this door straight away. It doesn’t hold the door shut at all.

    My concern was that this isn’t right, maybe the door isn’t sealing correctly or the vacuum isn’t being created as it should.

    #456614
    electrofix
    Moderator

    Re: Fridge door can be opened easily straight away after clo

    vacuum is only created if the unit is completely sealed. as you close the door the warm air contracts but on most fridge models there is a drain tube at the rear that will let air in to equalize the pressure

    anyway as said before don’t worry unless the door seal is not contacting the unit

    Dave

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.