Sanyo combination microwave spares

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Sanyo combination microwave spares

Viewing 10 posts - 1 through 10 (of 10 total)
  • Author
    Posts
  • May 6, 2005 at 4:07 pm #9416
    andy_art_trigg
    Participant

    This is my own Microwave. Any idea where I could get the control panel for a Sanyo EM-D993 ?

    May 6, 2005 at 4:45 pm #133957
    Bryan
    Participant

    Re: Sanyo combination microwave spares

    Andy

    Charles Hyde and Son. Tel. 08709909474.

    If you google Charles Hyde and Son you`ll get their website and you can search without any restrictions.

    11931DH PCB Control ?? £55:71 plus vat in stock 😥

    Hope this helps.

    Bryan

    May 6, 2005 at 4:49 pm #133958
    Dave_Conway
    Participant

    Re: Sanyo combination microwave spares

    Here it is:

    http://www.chsinteractive.co.uk/index.html

    If you have problems with them supplying, gimme a shout, I have an account 😉

    Dave.

    May 6, 2005 at 4:53 pm #133959
    andy_art_trigg
    Participant

    Re: Sanyo combination microwave spares

    Thanks muchly. I’ve never repaired microwaves though. It has lost some of its options which you used to be able to cycle through and it sometimes gets confused by displaying wrong options altogether. I also suspect it gives more power than it should on low microwave settings.

    Does it sound like the control panel would fix it and is it easy to replace?

    May 6, 2005 at 5:13 pm #133960
    Bryan
    Participant

    Re: Sanyo combination microwave spares

    Andy

    If the touchpad/key unit/membrane panel is not responding then it normally is at fault.From memory it was a problem on these microwaves.Pretty straight forward job, but you have to peel off the front panel carefully without damaging it as you need to stick it back on after you fit new keyunit.

    Part No. 11933HS for keyunit….. special order. 😥

    As for the too much power on low settings, I would doubt this to be possible.

    Cheers

    Bryan

    May 6, 2005 at 5:19 pm #133961
    andy_art_trigg
    Participant

    Re: Sanyo combination microwave spares

    Thanks Bryan. Do you mean it’s not a fault likley to happen? I don’t have an account with them so would they charge me retail? It wouldn’t be viable to open an account just for the one part.

    It’s not that the touch panel doesn’t respond as such, it’s more that it either displays options from a different button or it cycles through some of the buttons options but misses some out.

    thanks

    Andy

    May 6, 2005 at 5:21 pm #133962
    Bryan
    Participant

    Re: Sanyo combination microwave spares

    andy_art_trigg wrote: I’ve never repaired microwaves

    Sorry forgot to add VERY HIGH VOLTAGES ,make sure to disconnect from supply and discharge H.V. Capacitor.

    Bryan

    May 6, 2005 at 5:32 pm #133963
    Bryan
    Participant

    Re: Sanyo combination microwave spares

    andy_art_trigg wrote:

    It’s not that the touch panel doesn’t respond as such, it’s more that it either displays options from a different button or it cycles through some of the buttons options but misses some out.

    Not 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} sure but it does seem like faulty touchpad/keyunit.

    Dave just volunteered to help you out with ordering parts from CH&S.

    Bryan

    May 6, 2005 at 5:59 pm #133964
    andy_art_trigg
    Participant

    Re: Sanyo combination microwave spares

    Thanks guys. I’ll see if the missus thinks it’s worth the money to get some of the functions back. The only one I miss is “Reheat:Plated” which I used to use to reheat me tea properly. That fuction has just disappeared.

    May 6, 2005 at 6:57 pm #133965
    dpm
    Participant

    Take a couple of minutes to meter out the keypad matrix, see whether it’s just a dead button or if indeed the processor has lost it’s marbles…

  • Author
    Posts
Viewing 10 posts - 1 through 10 (of 10 total)
  • You must be logged in to reply to this topic.