Beko WME7247s

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko WME7247s

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 5, 2018 at 6:01 pm #94198
    ray.t
    Participant

    Hi all,
    Been to this machine today that when you switch it on it comes up with 18 in the display and the fabric conditioner symbol is flashing.
    I have tried to reset and go into the test mode but it won’t let me do anything else apart from set the delay timer.
    Just wondered if anyone had any ideas.
    Thanks,
    Ray

    July 5, 2018 at 7:43 pm #456685
    Seamy
    Participant

    Re: Beko WME7247s

    The fabric conditioner symbol flashing denotes program dial in wrong position, so check little cable connection to selector & at main board, or selector itself may be duff
    E18 may be last fault code detected, unbalanced load

    July 5, 2018 at 8:28 pm #456686
    electrofix
    Moderator

    Re: Beko WME7247s

    have pm,ed you the fault guide and yes it looks like a prog selector problem

    Dave

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.