- This topic has 4 replies, 4 voices, and was last updated 7 years, 9 months ago by
.
-
Posts
-
Replaced brushes in this miele yesterday. Ran on 600 spin to bed in new brushes. Then ran on express wash and left. Cust rang later to say it completed express wash ok but when a new wash was selected it faulted with Mechanical fault E60. Only other thing I noticed was original brushes were very unevenly worn as in one was completely gone and sooted up on end, other was about 70{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d}. Any advice on this one please or a service manual if available.Thank you.Paul.
Re: miele W1513 E60
manual are few and far between but
https://www.manualslib.com/brand/miele/washer.html
look down the list for a close model and technical information. you can often find a close machine or a lot of clues from other models
Dave
Re: miele W1513 E60
Seriously uneven brush wear is usually not a good sign, 99{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} of the time the motor/armature is faulty. 🙁
- You must be logged in to reply to this topic.