Carbon Brushes For Zanussi ZWF1000M

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Carbon Brushes For Zanussi ZWF1000M

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • July 17, 2018 at 3:03 pm #94271
    Whittlehoot
    Participant

    Hi, has anyone come across suitable (hopefully cheap) brushes for this machine please?

    I’ve looked high and low on the Internet and can’t find them at all. A local White Goods repairer can get them at a cost to them of £42, but since the drum bearings are already on the way out, I don’t want to spend too much just to keep it going for maybe only a few weeks or possibly months. Ideally, I just need the brushes or maybe the inserts, not the plastic housings.

    The prod. number is 914579831 and the motor is a Welling HXG40A02.MD02.

    The brushes have the number 178 stamped into the carbon. I’ve attached a picture of one of the brushes stripped down, to give you a better idea of what it looks like.

    Thanks.

    July 17, 2018 at 3:59 pm #456859
    electrofix
    Moderator

    Re: Carbon Brushes For Zanussi ZWF1000M

    would be easier to see the brushes whole

    Zanussi don’t list them but they look like

    https://shop.ukwhitegoods.co.uk/047317- … ushes-8240

    cant be 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} but looks likely

    put brush back together, see if carbon slope is facing correct way and terminals are correct size

    Dave

    July 17, 2018 at 5:57 pm #456860
    Whittlehoot
    Participant

    Re: Carbon Brushes For Zanussi ZWF1000M

    Hi Dave

    Thanks for your response. Unfortunately, they’re not like those ones. They’re back on the machine now, but they look like this:

    David

    July 17, 2018 at 6:58 pm #456861
    electrofix
    Moderator

    Re: Carbon Brushes For Zanussi ZWF1000M

    quick google search give me part no 4055050480

    https://www.amazon.co.uk/Brushes-405505 … B06Y2XVG7S

    or

    https://shop.ukwhitegoods.co.uk/4055050 … rbon-brush

    try this one


    Dave

    August 3, 2018 at 8:07 pm #456862
    Whittlehoot
    Participant

    Re: Carbon Brushes For Zanussi ZWF1000M

    Hi Dave

    Don’t know how you managed that and I’m impressed. I spent literally hours going down dead ends trying to match the machine to a specific brush part number. I couldn’t find anything that tied the two together. The nearest one I found was the one I posted the picture of from ebay Germany and they wouldn’t post to the UK.

    Equipped with the part number, I’ve been able to find a pair for £9, cheap enough to make it worthwhile getting it going until the bearings completely fail. I think they’re reconditioned (new inserts) rather than new, but they seem to work okay. Gives me time to carefully select a new machine, rather than rushing out to buy one.

    Thanks very much for your help.

    David

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.