WDX8543130W Beko washer drier.

This topic has 7 replies, 3 voices, and was last updated 7 years, 8 months ago by aqua_serve.

Viewing 8 posts - 1 through 8 (of 8 total)

Author

Posts
July 24, 2018 at 6:43 am #94307

aqua_serve
Participant

Morning all,

I’ve been to see a WDX8543130W Beko washer drier, when switched on there is a brief beep then nothing, the display remains blank. Does my prognosis sound right? I’ve visually checked the other boards on the machine and couldn’t see any signs of damage on any of them.

Can any of you provide me with a part number for the display board.

Yours,

Mark

July 24, 2018 at 8:21 am #456954

electrofix
Moderator

Re: WDX8543130W Beko washer drier.

should be this one

it may not be the front board. the display board gets its power supply from the main board

Dave

August 13, 2018 at 10:54 pm #456955

aqua_serve
Participant

Re: WDX8543130W Beko washer drier.

Thanks Dave,

That part number doesn’t seem to exist online. Do you have a part number for the board supplying the power to the display board?

Mark

August 14, 2018 at 12:06 am #456956

electrofix
Moderator

Re: WDX8543130W Beko washer drier.

Can get it but not back home till Friday

Unless someone else can look it up will try to check later in the week

Dave

August 14, 2018 at 7:07 am #456957

aqua_serve
Participant

Re: WDX8543130W Beko washer drier.

Thanks Dave, much appreciated.

Do any of you guys have a service manual for this machine?

Mark

August 14, 2018 at 9:37 am #456958

electrofix
Moderator

Re: WDX8543130W Beko washer drier.

Again yes but same problem of lack of good net access

Dave

August 14, 2018 at 2:29 pm #456959

murv
Participant

Re: WDX8543130W Beko washer drier.

Main PCB is P/N 2437301041

Murv…

August 17, 2018 at 7:33 am #456960

murv
Participant

Re: WDX8543130W Beko washer drier.

I have sent circuit via personal message. Hope this helps.

Murv…
Author

Posts

Viewing 8 posts - 1 through 8 (of 8 total)

You must be logged in to reply to this topic.